Road Safety & Highway Barriers · Upper Siang
Metal Beam Barriers manufactures Highway Crash Barrier to Upper Siang, Arunachal Pradesh projects factory-direct. Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
Manufacturer-Direct · Northeast
Highway Crash Barriers are essential roadside safety systems engineered to contain and redirect errant vehicles, thereby reducing the severity of accidents and enhancing highway safety. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and relevant IRC standards, these barriers are widely deployed on national highways, expressways, bridges, flyovers, medians, embankments and hazardous road sections. The system consists of galvanised steel beam rails, posts, spacer blocks, fasteners and end terminals designed to absorb impact energy and safely guide vehicles back onto the roadway. Highway crash barriers are available in W Beam and Thrie Beam variants with multiple containment levels to suit different traffic and site requirements. Fabricated from high-strength steel and protected with hot-dip galvanising, the barriers offer excellent corrosion resistance and long service life under diverse environmental conditions. Every component is manufactured to comply with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring dependable performance on critical infrastructure projects across India.
In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers answers every "Highway Crash Barrier Manufacturer in Upper Siang" search with a simple offer: In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
For Upper Siang and the wider Northeast region — where the focus is frontier-area strategic roads — our Highway Crash Barrier is manufactured to IRC:119 and MoRTH Section 800, treated for extreme rainfall and Himalayan landslide exposure, and dispatched on corridors serving Trans-Arunachal Highway (NH-13) and border roads.
Before you compare quotations, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in Arunachal Pradesh will inspect:
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Upper Siang carries mill test certificates, coating-mass reports and dimensional records matching these values.
Every intermediate hand adds cost and blurs responsibility. Because Metal Beam Barriers manufactures, quotes and ships from one desk, your Upper Siang project gets: factory-gate pricing, production slots matched to your chainage schedule, 6-8 days typical transit via the Guwahati corridor, and one accountable engineering desk from BOQ to offloading. production-led enquiries get exactly the detail they need — itemised factory pricing — on the first call.
Q1: Who is the best Highway Crash Barrier Manufacturer in Upper Siang?
Metal Beam Barriers (Auroguard Private Limited) fabricates Highway Crash Barrier for Upper Siang projects factory-direct — without any trading layer, so the manufacturer is directly accountable for what lands on your site.
Q2: What does Highway Crash Barrier cost in Upper Siang?
Pricing is tender-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no distributor margin — share your BOQ for a same-day working quote.
Q3: How fast can Highway Crash Barrier reach Upper Siang?
On average 6-8 days by road from the Kolkata factory, with bulk tonnage routed via the Guwahati rail head. Priority production slots are available for deadlines.
Send your BOQ, chainage schedule or tender extract and the Metal Beam Barriers desk responds directly with manufacturer pricing and documentation.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) manufactures Highway Crash Barrier for Upper Siang projects factory-direct — one accountable desk from quote to offloading.
Yes. Auroguard Private Limited manufactures Highway Crash Barrier on its own roll-forming and fabrication lines with hot-dip galvanising to 550 g/m2, and supplies it factory-direct — you buy from the manufacturer, not a trader.
Yes. Highway Crash Barrier is manufactured to IRC:119, MoRTH Section 800 and applicable IS specifications, with material test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Factory-direct supply means no distributor markup — share your BOQ for a same-day working quote.
Yes. Every supply of Highway Crash Barrier to Upper Siang is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Upper Siang
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Upper Siang
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.