Road Safety & Highway Barriers · Odisha
Metal Beam Barriers supplies Thrie Beam Crash Barrier for Odisha, India projects factory-direct. MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
Supplier-Direct · India
Thrie Beam Crash Barriers are high-performance roadside safety systems specifically engineered for locations requiring enhanced vehicle containment and impact resistance. Owing to their three-wave profile, these barriers provide greater structural strength than conventional W Beam barriers and are widely used on bridges, flyovers, medians, embankments, sharp curves and high-speed expressways. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC standards, the system consists of galvanized thrie beam rails, steel posts, spacer blocks, fasteners and end terminals designed to absorb and redirect impact forces safely. The additional corrugation of the thrie beam profile improves rigidity and containment performance, making it suitable for critical infrastructure projects with heavy traffic conditions. Fabricated from high-strength steel and protected with hot-dip galvanisation, the barrier offers excellent corrosion resistance and long service life under demanding environmental conditions. All components are manufactured in compliance with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring reliable performance and enhanced roadside safety across highways and expressways throughout India.
Stock-and-dispatch discipline: consignments are load-planned by road, rail and container freight with GST invoice, dispatch challan and material test certificates in every truck — matched to your chainage schedule and site offloading windows.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers answers every "Thrie Beam Crash Barrier Supplier in Odisha" search with a simple offer: Stock-and-dispatch discipline: consignments are load-planned by road, rail and container freight with GST invoice, dispatch challan and material test certificates in every truck — matched to your chainage schedule and site offloading windows.
For Odisha and the wider India region — where the focus is highway and infrastructure modernisation — our Thrie Beam Crash Barrier is manufactured to IRC:119 and MoRTH Section 800, treated for standard Indian site conditions, and dispatched on corridors serving national highway upgrades.
Before you compare quotations, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in India will inspect:
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Odisha carries mill test certificates, coating-mass reports and dimensional records matching these values.
Every intermediate hand adds cost and blurs responsibility. Because Metal Beam Barriers manufactures, quotes and ships from one desk, your Odisha project gets: factory-gate pricing, production slots matched to your chainage schedule, 5-7 days typical transit via the Kolkata corridor, and one accountable engineering desk from BOQ to offloading. logistics-led enquiries get exactly the detail they need — itemised factory pricing — on the first call.
Q1: Who is the best Thrie Beam Crash Barrier Supplier in Odisha?
Metal Beam Barriers (Auroguard Private Limited) delivers Thrie Beam Crash Barrier for Odisha projects factory-direct — without any trading layer, so the manufacturer is directly accountable for what lands on your site.
Q2: What does Thrie Beam Crash Barrier cost in Odisha?
Pricing is tender-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no distributor margin — share your BOQ for a same-day working quote.
Q3: How fast can Thrie Beam Crash Barrier reach Odisha?
On average 5-7 days by road from the Kolkata factory, with bulk tonnage routed via the Kolkata rail head. Priority production slots are available for deadlines.
Send your BOQ, chainage schedule or tender extract and the Metal Beam Barriers desk responds directly with manufacturer pricing and documentation.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) supplies Thrie Beam Crash Barrier for Odisha projects factory-direct — one accountable desk from quote to offloading.
Standard consignments of Thrie Beam Crash Barrier dispatch from the Kolkata factory with typical road transit of 5-7 days; bulk tonnage moves by rail. Urgent tender-time supply can be arranged on confirmation.
Yes. Thrie Beam Crash Barrier is manufactured to IRC:119, MoRTH Section 800 and applicable IS specifications, with mill test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no dealer margin — share your BOQ for a fast written quotation.
Yes. Every supply of Thrie Beam Crash Barrier to Odisha is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Odisha
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Odisha
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.