Road Safety & Highway Barriers · Mathura
Metal Beam Barriers manufactures Metal Beam Crash Barrier for Mathura, Uttar Pradesh projects factory-direct. High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
Manufacturer-Direct · North India
Metal Beam Crash Barrier systems are designed to improve road safety by preventing vehicles from leaving the carriageway and reducing the severity of accidents. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC guidelines, these barriers are widely installed on national highways, expressways, bridges, medians, flyovers, embankments and critical roadside sections. The system comprises galvanised steel beam rails, steel posts, spacer blocks, fasteners and terminal sections engineered to absorb and redirect vehicular impact energy safely. Available in W Beam and Thrie Beam configurations, the barriers can be supplied in multiple containment levels to suit varying traffic and site requirements. All components are manufactured from high-strength steel and are hot-dip galvanised to provide superior corrosion resistance and long service life under Indian climatic conditions. The barrier systems comply with IRC:SP:84, IRC:119 and MORTH Section 800 requirements and are suitable for high-speed corridors and infrastructure projects across India.
In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Metal Beam Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Turn Down / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves, Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers answers every "Metal Beam Crash Barrier Manufacturer in Mathura" search with a simple offer: In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
For Mathura and the wider North India region — where the focus is Bharatmala Phase-1 corridors and expressway upgrades — our Metal Beam Crash Barrier is manufactured to IRC:119 and MoRTH Section 800, treated for plains alluvium with seasonal sub-grade weakening, and dispatched on corridors serving Purvanchal Expressway, Ganga Expressway, NH-19.
Before you compare quotations, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in Uttar Pradesh will inspect:
| Specification | Value |
|---|---|
| System Type | Metal Beam Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Turn Down / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves, Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Mathura carries mill test certificates, coating-mass reports and dimensional records matching these values.
Every intermediate hand adds cost and blurs responsibility. Because Metal Beam Barriers manufactures, quotes and ships from one desk, your Mathura project gets: factory-gate pricing, production slots matched to your chainage schedule, 4-5 days typical transit via the Lucknow corridor, and one accountable engineering desk from BOQ to offloading. production-led enquiries get exactly the detail they need — itemised factory pricing — on the first call.
Q1: Who is the best Metal Beam Crash Barrier Manufacturer in Mathura?
Metal Beam Barriers (Auroguard Private Limited) fabricates Metal Beam Crash Barrier for Mathura projects factory-direct — without any trading layer, so the manufacturer is directly accountable for what lands on your site.
Q2: What does Metal Beam Crash Barrier cost in Mathura?
Pricing is tender-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no distributor margin — share your BOQ for a same-day working quote.
Q3: How fast can Metal Beam Crash Barrier reach Mathura?
On average 4-5 days by road from the Kolkata factory, with bulk tonnage routed via the Lucknow rail head. Priority production slots are available for deadlines.
Send your BOQ, chainage schedule or tender extract and the Metal Beam Barriers desk responds directly with manufacturer pricing and documentation.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) manufactures Metal Beam Crash Barrier for Mathura projects factory-direct — one accountable desk from quote to offloading.
Yes. Auroguard Private Limited manufactures Metal Beam Crash Barrier on its own roll-forming and fabrication lines with hot-dip galvanising to 550 g/m2, and supplies it factory-direct — you buy from the manufacturer, not a trader.
Yes. Metal Beam Crash Barrier is manufactured to IRC:119, MoRTH Section 800 and applicable IS specifications, with mill test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no dealer margin — share your BOQ for a fast written quotation.
Yes. Every supply of Metal Beam Crash Barrier to Mathura is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Mathura
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Mathura
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.