Road Safety & Highway Barriers · Jhalawar
Metal Beam Barriers supplies Thrie Beam Crash Barrier in Jhalawar, Rajasthan direct from our factory. MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
Direct Manufacturer Supply
Thrie Beam Crash Barriers are high-performance roadside safety systems specifically engineered for locations requiring enhanced vehicle containment and impact resistance. Owing to their three-wave profile, these barriers provide greater structural strength than conventional W Beam barriers and are widely used on bridges, flyovers, medians, embankments, sharp curves and high-speed expressways. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC standards, the system consists of galvanized thrie beam rails, steel posts, spacer blocks, fasteners and end terminals designed to absorb and redirect impact forces safely. The additional corrugation of the thrie beam profile improves rigidity and containment performance, making it suitable for critical infrastructure projects with heavy traffic conditions. Fabricated from high-strength steel and protected with hot-dip galvanisation, the barrier offers excellent corrosion resistance and long service life under demanding environmental conditions. All components are manufactured in compliance with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring reliable performance and enhanced roadside safety across highways and expressways throughout India.
For Jhalawar projects, Metal Beam Barriers delivers Thrie Beam Crash Barrier with a typical transit window of 5-7 days via the most cost-effective corridor. Finish and packaging are matched to arid desert exposure, sand abrasion, extreme temperature swings — supporting corridors such as Delhi–Mumbai Expressway and DMIC industrial corridor.
In the North India region the focus is Delhi–Mumbai Expressway DMIC corridor. Metal Beam Barriers supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers fabricates Thrie Beam Crash Barrier for road, highway, industrial and institutional projects across Jhalawar and the wider North India region. Engineered to IRC:119 and MoRTH Section 800, every consignment is finished for arid desert exposure, sand abrasion, extreme temperature swings and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our Thrie Beam Crash Barrier supports projects on corridors such as Delhi–Mumbai Expressway and DMIC industrial corridor. Forward your tender extract and the engineering desk quotes your Jhalawar project directly.
Highway procurement mandates precision. Our Thrie Beam Crash Barrier is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Jhalawar. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Metal Beam Barriers coordinates all material dispatches to align perfectly with your specific project site logistics in Jhalawar.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Jhalawar and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Jhalawar. |
| Freight Configuration | Barrier panels, posts and fasteners are bundled by volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Jhalawar.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Jhalawar and surrounding economic belts in Rajasthan. The regional infrastructure focus — Delhi–Mumbai Expressway DMIC corridor — aligns directly with our Thrie Beam Crash Barrier supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for Thrie Beam Crash Barrier delivered to Jhalawar?
For standard consignments, the road transit window from our Kolkata factory is approximately 5-7 days. Bulk-tonnage rail dispatch is routed through the Jaipur goods yard. Faster dispatch can be organised on request.
Q2: Does the Thrie Beam Crash Barrier supplied to Jhalawar meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to IRC:119, MoRTH Section 800 and the applicable IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can Thrie Beam Crash Barrier be fitted to existing barrier runs in Jhalawar?
Yes. Our systems are engineered for compatibility with standard posts, spacers, transition pieces and end terminals. Fitment guidance and drawings come at no extra cost.
Move your Jhalawar project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Buy Direct in Jhalawar
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) is a leading manufacturer and supplier of Thrie Beam Crash Barrier in Jhalawar and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Thrie Beam Crash Barrier to Jhalawar is 5-7 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Thrie Beam Crash Barrier supplied by Metal Beam Barriers in Jhalawar is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. We regularly handle bulk and tender quantities of Thrie Beam Crash Barrier in Jhalawar for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Thrie Beam Crash Barrier in Jhalawar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Jhalawar, with no middlemen.
Also in Jhalawar
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.