Road Safety & Highway Barriers · Dima Hasao
Metal Beam Barriers supplies Highway Crash Barrier in Dima Hasao, Assam direct from our factory. Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
Direct Manufacturer Supply
Highway Crash Barriers are essential roadside safety systems engineered to contain and redirect errant vehicles, thereby reducing the severity of accidents and enhancing highway safety. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and relevant IRC standards, these barriers are widely deployed on national highways, expressways, bridges, flyovers, medians, embankments and hazardous road sections. The system consists of galvanised steel beam rails, posts, spacer blocks, fasteners and end terminals designed to absorb impact energy and safely guide vehicles back onto the roadway. Highway crash barriers are available in W Beam and Thrie Beam variants with multiple containment levels to suit different traffic and site requirements. Fabricated from high-strength steel and protected with hot-dip galvanising, the barriers offer excellent corrosion resistance and long service life under diverse environmental conditions. Every component is manufactured to comply with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring dependable performance on critical infrastructure projects across India.
For Dima Hasao projects, Metal Beam Barriers delivers Highway Crash Barrier with a typical transit window of 5-6 days via the most cost-effective corridor. Finish and packaging are matched to monsoon flood plains and Brahmaputra erosion zones — supporting corridors such as NH-27 East-West corridor and Bharatmala Northeast spur.
In the Northeast region the focus is border-area connectivity and embankment reinforcement. Metal Beam Barriers supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers produces Highway Crash Barrier for road, highway, industrial and institutional projects across Dima Hasao and the wider Northeast region. Built to IRC:119 and MoRTH Section 800, every consignment is prepared for monsoon flood plains and Brahmaputra erosion zones and dispatched factory-direct — direct from the desk that quotes and ships.
From national highway corridors to EPC contracts, our Highway Crash Barrier supports projects on corridors such as NH-27 East-West corridor and Bharatmala Northeast spur. Send your requirement and the engineering desk quotes your Dima Hasao project directly.
Highway procurement mandates precision. Our Highway Crash Barrier is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Dima Hasao. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Metal Beam Barriers coordinates all material dispatches to align perfectly with your specific project site logistics in Dima Hasao.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Dima Hasao and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Dima Hasao. |
| Freight Configuration | Barrier panels, posts and fasteners are bundled by volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Dima Hasao.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Dima Hasao and surrounding economic belts in Assam. The regional infrastructure focus — border-area connectivity and embankment reinforcement — aligns directly with our Highway Crash Barrier supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the usual lead time for Highway Crash Barrier dispatched to Dima Hasao?
For standard consignments, the road transit window from our Kolkata factory is typically 5-6 days. Bulk-tonnage rail dispatch is routed through the Guwahati goods yard. Priority despatch is available for tender deadlines.
Q2: Does the Highway Crash Barrier supplied to Dima Hasao meet IRC / MoRTH / IS specifications?
Yes. Every supply is manufactured to IRC:119, MoRTH Section 800 and the applicable IS specifications. Test certificates, coating reports and inspection-support documents accompany every dispatch — prepared for tender and consultant review.
Q3: Can Highway Crash Barrier be integrated with existing barrier runs in Dima Hasao?
Yes. Our systems are built for compatibility with standard posts, spacers, transition pieces and end terminals. Drawings and technical support are included free of charge.
Streamline your procurement pipeline today. Call or message our team to receive a detailed BOQ quotation and direct factory pricing — no middlemen, no routing.
Buy Direct in Dima Hasao
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) is a leading manufacturer and supplier of Highway Crash Barrier in Dima Hasao and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Highway Crash Barrier to Dima Hasao is 5-6 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Highway Crash Barrier supplied by Metal Beam Barriers in Dima Hasao is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. We regularly handle bulk and tender quantities of Highway Crash Barrier in Dima Hasao for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Highway Crash Barrier in Dima Hasao is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Dima Hasao, with no middlemen.
Also in Dima Hasao
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.