Road Safety & Highway Barriers · Churu
Metal Beam Barriers supplies Highway Guardrail in Churu, Rajasthan direct from our factory. Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
Direct Manufacturer Supply
Highway Guardrails are roadside safety barriers designed to contain and redirect errant vehicles, thereby minimizing accident severity and improving road safety. Manufactured in compliance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC guidelines, these guardrails are extensively used on national highways, expressways, bridges, flyovers, medians, embankments and other critical road sections. The system comprises galvanized steel beam rails, steel posts, spacer blocks, fasteners and terminal sections engineered to absorb impact forces and safely guide vehicles back onto the roadway. Highway guardrails are available in W Beam and Thrie Beam configurations with various containment levels to suit different traffic conditions and site requirements. Constructed from high-strength steel and protected with hot-dip galvanization, the guardrail systems offer superior corrosion resistance, structural strength and long service life under diverse environmental conditions. All components are manufactured in accordance with MORTH Section 800, IRC:SP:84 and IRC:119 standards, making them suitable for modern highway infrastructure projects across India.
For Churu projects, Metal Beam Barriers delivers Highway Guardrail with a typical transit window of 5-7 days via the most cost-effective corridor. Finish and packaging are matched to arid desert exposure, sand abrasion, extreme temperature swings — supporting corridors such as Delhi–Mumbai Expressway and DMIC industrial corridor.
In the North India region the focus is Delhi–Mumbai Expressway DMIC corridor. Metal Beam Barriers supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Highway Guardrail |
| Variants | W Beam Guardrail / Thrie Beam Guardrail |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers produces Highway Guardrail for road, highway, industrial and institutional projects across Churu and the wider North India region. Built to IRC:119 and MoRTH Section 800, every consignment is prepared for arid desert exposure, sand abrasion, extreme temperature swings and dispatched factory-direct — direct from the desk that quotes and ships.
From national highway corridors to EPC contracts, our Highway Guardrail supports projects on corridors such as Delhi–Mumbai Expressway and DMIC industrial corridor. Send your requirement and the engineering desk quotes your Churu project directly.
Highway procurement mandates precision. Our Highway Guardrail is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Churu. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| System Type | Highway Guardrail |
| Variants | W Beam Guardrail / Thrie Beam Guardrail |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Metal Beam Barriers coordinates all material dispatches to align perfectly with your specific project site logistics in Churu.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Churu and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Churu. |
| Freight Configuration | Barrier panels, posts and fasteners are bundled by volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Churu.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Churu and surrounding economic belts in Rajasthan. The regional infrastructure focus — Delhi–Mumbai Expressway DMIC corridor — aligns directly with our Highway Guardrail supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the usual lead time for Highway Guardrail dispatched to Churu?
For standard consignments, the road transit window from our Kolkata factory is typically 5-7 days. Bulk-tonnage rail dispatch is routed through the Jaipur goods yard. Priority despatch is available for tender deadlines.
Q2: Does the Highway Guardrail supplied to Churu meet IRC / MoRTH / IS specifications?
Yes. Every supply is manufactured to IRC:119, MoRTH Section 800 and the applicable IS specifications. Test certificates, coating reports and inspection-support documents accompany every dispatch — prepared for tender and consultant review.
Q3: Can Highway Guardrail be integrated with existing barrier runs in Churu?
Yes. Our systems are built for compatibility with standard posts, spacers, transition pieces and end terminals. Drawings and technical support are included free of charge.
Streamline your procurement pipeline today. Call or message our team to receive a detailed BOQ quotation and direct factory pricing — no middlemen, no routing.
Buy Direct in Churu
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) is a leading manufacturer and supplier of Highway Guardrail in Churu and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Highway Guardrail to Churu is 5-7 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Highway Guardrail supplied by Metal Beam Barriers in Churu is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. We regularly handle bulk and tender quantities of Highway Guardrail in Churu for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Highway Guardrail in Churu is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Churu, with no middlemen.
Also in Churu
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.