Road Safety & Highway Barriers · Car Nicobar
Metal Beam Barriers supplies W Beam Crash Barrier in Car Nicobar, Andaman and Nicobar Islands direct from our factory. MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
Direct Manufacturer Supply
W Beam Crash Barriers are widely used roadside safety systems designed to prevent vehicles from leaving the roadway and to minimize the severity of accidents. Featuring a two-wave corrugated profile, W beam barriers efficiently absorb and dissipate impact energy while redirecting errant vehicles back onto the carriageway. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and relevant IRC standards, these barriers are extensively installed on national highways, expressways, bridges, medians, flyovers, embankments and hazardous road sections. The system comprises galvanized W beam rails, steel posts, spacer blocks, fasteners and terminal sections engineered to provide superior strength and impact resistance. Fabricated from high-strength steel and protected with hot-dip galvanization, W beam crash barriers offer excellent corrosion resistance and durability under diverse climatic conditions. All components are manufactured in compliance with MORTH Section 800, IRC:SP:84 and IRC:119 standards, ensuring dependable performance and enhanced road safety across infrastructure projects throughout India.
For Car Nicobar projects, Metal Beam Barriers delivers W Beam Crash Barrier with a typical transit window of 10-14 days via the most cost-effective corridor. Finish and packaging are matched to highest humidity, salt spray, cyclone exposure — supporting corridors such as NH-4 Andaman Trunk Road.
In the South India region the focus is island road safety + jetty links. Metal Beam Barriers supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | W Beam Crash Barrier |
| Barrier Profile | Two Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 311 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers fabricates W Beam Crash Barrier for road, highway, industrial and institutional projects across Car Nicobar and the wider South India region. Engineered to IRC:119 and MoRTH Section 800, every consignment is finished for highest humidity, salt spray, cyclone exposure and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our W Beam Crash Barrier supports projects on corridors such as NH-4 Andaman Trunk Road. Forward your tender extract and the engineering desk quotes your Car Nicobar project directly.
Highway procurement mandates precision. Our W Beam Crash Barrier is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Car Nicobar. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| System Type | W Beam Crash Barrier |
| Barrier Profile | Two Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 311 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Metal Beam Barriers coordinates all material dispatches to align perfectly with your specific project site logistics in Car Nicobar.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Car Nicobar and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Car Nicobar. |
| Freight Configuration | Barrier panels, posts and fasteners are bundled by volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Car Nicobar.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Car Nicobar and surrounding economic belts in Andaman and Nicobar Islands. The regional infrastructure focus — island road safety + jetty links — aligns directly with our W Beam Crash Barrier supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for W Beam Crash Barrier delivered to Car Nicobar?
For standard consignments, the road transit window from our Kolkata factory is approximately 10-14 days. Bulk-tonnage rail dispatch is routed through the Port Blair goods yard. Faster dispatch can be organised on request.
Q2: Does the W Beam Crash Barrier supplied to Car Nicobar meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to IRC:119, MoRTH Section 800 and the applicable IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can W Beam Crash Barrier be fitted to existing barrier runs in Car Nicobar?
Yes. Our systems are engineered for compatibility with standard posts, spacers, transition pieces and end terminals. Fitment guidance and drawings come at no extra cost.
Move your Car Nicobar project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Buy Direct in Car Nicobar
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) is a leading manufacturer and supplier of W Beam Crash Barrier in Car Nicobar and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for W Beam Crash Barrier to Car Nicobar is 10-14 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. W Beam Crash Barrier supplied by Metal Beam Barriers in Car Nicobar is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. We regularly handle bulk and tender quantities of W Beam Crash Barrier in Car Nicobar for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of W Beam Crash Barrier in Car Nicobar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Car Nicobar, with no middlemen.
Also in Car Nicobar
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.