Road Safety & Highway Barriers · Buxar
Metal Beam Barriers dispatches Highway Crash Barrier to Buxar, Bihar projects factory-direct. Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
Supplier-Direct · East India
Highway Crash Barriers are essential roadside safety systems engineered to contain and redirect errant vehicles, thereby reducing the severity of accidents and enhancing highway safety. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and relevant IRC standards, these barriers are widely deployed on national highways, expressways, bridges, flyovers, medians, embankments and hazardous road sections. The system consists of galvanised steel beam rails, posts, spacer blocks, fasteners and end terminals designed to absorb impact energy and safely guide vehicles back onto the roadway. Highway crash barriers are available in W Beam and Thrie Beam variants with multiple containment levels to suit different traffic and site requirements. Fabricated from high-strength steel and protected with hot-dip galvanising, the barriers offer excellent corrosion resistance and long service life under diverse environmental conditions. Every component is manufactured to comply with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring dependable performance on critical infrastructure projects across India.
Dispatch-planned supply: consignments are load-planned by road, rail and container freight with GST invoice, dispatch challan and material test certificates in every truck — matched to your chainage schedule and site offloading windows.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers is the direct manufacturer behind every "Highway Crash Barrier Supplier in Buxar" search with a clear offer: Dispatch-planned supply: consignments are load-planned by road, rail and container freight with GST invoice, dispatch challan and material test certificates in every truck — matched to your chainage schedule and site offloading windows.
For Buxar and the wider East India region — where the focus is East-West expressway upgrades and Ganga bridges — our Highway Crash Barrier is engineered to IRC:119 and MoRTH Section 800, prepared for flood-plain alluvial soils requiring sub-grade reinforcement, and dispatched on corridors serving NH-19 Golden Quadrilateral and PMGSY rural road upgrades.
Before you shortlist a vendor, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in Bihar will inspect:
| Specification | Value |
|---|---|
| System Type | Highway Crash Barrier |
| Variants | W Beam Barrier / Thrie Beam Barrier |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W1, W2, W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| W Beam Size | 4318 mm × 311 mm × 85 mm |
| Thrie Beam Size | 4318 mm × 506 mm × 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Highways, Expressways, Bridges, Medians, Flyovers, Curves and Embankments |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Buxar carries mill test certificates, coating-mass reports and dimensional records matching these values.
Middlemen add markup, not value. Because Metal Beam Barriers controls production and dispatch under one roof, your Buxar project gets: factory-gate pricing, production slots matched to your chainage schedule, 3-4 days typical transit via the Patna corridor, and one accountable engineering desk from BOQ to offloading. logistics-led enquiries get exactly the detail they need — production drawings and QC records — on the first call.
Q1: Who is the best Highway Crash Barrier Supplier in Buxar?
Metal Beam Barriers (Auroguard Private Limited) supplies Highway Crash Barrier for Buxar projects factory-direct — with zero intermediaries, so the factory is directly accountable for what lands on your site.
Q2: What does Highway Crash Barrier cost in Buxar?
Pricing is quotation-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no trader margin — send quantities for a fast written quotation.
Q3: How fast can Highway Crash Barrier reach Buxar?
Typically 3-4 days by road from the Kolkata factory, with bulk tonnage routed via the Patna rail head. Expedited dispatch is possible on confirmation.
Share quantity, containment class and destination and the Metal Beam Barriers desk responds directly with factory pricing, specifications and a dispatch plan.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) dispatches Highway Crash Barrier for Buxar projects factory-direct — no trading layer, no dealer margin.
Standard consignments of Highway Crash Barrier dispatch from the Kolkata factory with typical road transit of 3-4 days; bulk tonnage moves by rail. Urgent tender-time supply can be arranged on confirmation.
Yes. Highway Crash Barrier is produced to IRC:119, MoRTH Section 800 and applicable IS specifications, with material test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Factory-direct supply means no distributor markup — share your BOQ for a same-day working quote.
Yes. Every supply of Highway Crash Barrier to Buxar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Buxar
Production capability, engineering standards and factory QC — direct from the plant that makes it.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Buxar
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.