Road Safety & Highway Barriers · Banaskantha
Metal Beam Barriers manufactures Thrie Beam Crash Barrier to Banaskantha, Gujarat projects factory-direct. MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
Manufacturer-Direct · West India
Thrie Beam Crash Barriers are high-performance roadside safety systems specifically engineered for locations requiring enhanced vehicle containment and impact resistance. Owing to their three-wave profile, these barriers provide greater structural strength than conventional W Beam barriers and are widely used on bridges, flyovers, medians, embankments, sharp curves and high-speed expressways. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC standards, the system consists of galvanized thrie beam rails, steel posts, spacer blocks, fasteners and end terminals designed to absorb and redirect impact forces safely. The additional corrugation of the thrie beam profile improves rigidity and containment performance, making it suitable for critical infrastructure projects with heavy traffic conditions. Fabricated from high-strength steel and protected with hot-dip galvanisation, the barrier offers excellent corrosion resistance and long service life under demanding environmental conditions. All components are manufactured in compliance with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring reliable performance and enhanced roadside safety across highways and expressways throughout India.
In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers answers every "Thrie Beam Crash Barrier Manufacturer in Banaskantha" search with a simple offer: In-house roll-forming, press fabrication and hot-dip galvanising: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
For Banaskantha and the wider West India region — where the focus is Delhi–Mumbai Expressway DMIC and port corridors — our Thrie Beam Crash Barrier is manufactured to IRC:119 and MoRTH Section 800, treated for arid + coastal mix, salt-laden air near Kandla and Mundra, and dispatched on corridors serving Delhi–Mumbai Expressway and Mumbai–Ahmedabad bullet train corridor.
Before you compare quotations, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in Gujarat will inspect:
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Banaskantha carries mill test certificates, coating-mass reports and dimensional records matching these values.
Every intermediate hand adds cost and blurs responsibility. Because Metal Beam Barriers manufactures, quotes and ships from one desk, your Banaskantha project gets: factory-gate pricing, production slots matched to your chainage schedule, 6-7 days typical transit via the Ahmedabad corridor, and one accountable engineering desk from BOQ to offloading. production-led enquiries get exactly the detail they need — itemised factory pricing — on the first call.
Q1: Who is the best Thrie Beam Crash Barrier Manufacturer in Banaskantha?
Metal Beam Barriers (Auroguard Private Limited) fabricates Thrie Beam Crash Barrier for Banaskantha projects factory-direct — without any trading layer, so the manufacturer is directly accountable for what lands on your site.
Q2: What does Thrie Beam Crash Barrier cost in Banaskantha?
Pricing is tender-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no distributor margin — share your BOQ for a same-day working quote.
Q3: How fast can Thrie Beam Crash Barrier reach Banaskantha?
On average 6-7 days by road from the Kolkata factory, with bulk tonnage routed via the Ahmedabad rail head. Priority production slots are available for deadlines.
Send your BOQ, chainage schedule or tender extract and the Metal Beam Barriers desk responds directly with manufacturer pricing and documentation.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) manufactures Thrie Beam Crash Barrier for Banaskantha projects factory-direct — one accountable desk from quote to offloading.
Yes. Auroguard Private Limited manufactures Thrie Beam Crash Barrier on its own roll-forming and fabrication lines with hot-dip galvanising to 550 g/m2, and supplies it factory-direct — you buy from the manufacturer, not a trader.
Yes. Thrie Beam Crash Barrier is manufactured to IRC:119, MoRTH Section 800 and applicable IS specifications, with material test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Factory-direct supply means no distributor markup — share your BOQ for a same-day working quote.
Yes. Every supply of Thrie Beam Crash Barrier to Banaskantha is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Banaskantha
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Banaskantha
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.