Road Safety & Highway Barriers · Araria
Metal Beam Barriers roll-forms Thrie Beam Crash Barrier to Araria, Bihar projects factory-direct. MORTH-compliant thrie beam crash barrier systems designed for highways, bridges, medians and high-risk road sections. Manufactured from high-strength steel with hot-dip galvanised coating for superior containment and durability.
Manufacturer-Direct · East India
Thrie Beam Crash Barriers are high-performance roadside safety systems specifically engineered for locations requiring enhanced vehicle containment and impact resistance. Owing to their three-wave profile, these barriers provide greater structural strength than conventional W Beam barriers and are widely used on bridges, flyovers, medians, embankments, sharp curves and high-speed expressways. Manufactured in accordance with the Ministry of Road Transport & Highways (MORTH) specifications and IRC standards, the system consists of galvanized thrie beam rails, steel posts, spacer blocks, fasteners and end terminals designed to absorb and redirect impact forces safely. The additional corrugation of the thrie beam profile improves rigidity and containment performance, making it suitable for critical infrastructure projects with heavy traffic conditions. Fabricated from high-strength steel and protected with hot-dip galvanisation, the barrier offers excellent corrosion resistance and long service life under demanding environmental conditions. All components are manufactured in compliance with MORTH Section 800, IRC:SP:84 and IRC:119 requirements, ensuring reliable performance and enhanced roadside safety across highways and expressways throughout India.
Coil-to-corridor production under one roof: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Metal Beam Barriers is the direct manufacturer behind every "Thrie Beam Crash Barrier Manufacturer in Araria" search with a clear offer: Coil-to-corridor production under one roof: as the direct manufacturer, Auroguard Private Limited controls every stage — steel intake with mill test certificates, profile forming to MoRTH geometry, and dimensional QC before dispatch.
For Araria and the wider East India region — where the focus is East-West expressway upgrades and Ganga bridges — our Thrie Beam Crash Barrier is engineered to IRC:119 and MoRTH Section 800, prepared for flood-plain alluvial soils requiring sub-grade reinforcement, and dispatched on corridors serving NH-19 Golden Quadrilateral and PMGSY rural road upgrades.
Before you shortlist a vendor, verify these specification lines — they are what NHAI, MoRTH and PWD consultants in Bihar will inspect:
| Specification | Value |
|---|---|
| System Type | Thrie Beam Crash Barrier |
| Barrier Profile | Three Wave Beam |
| Applicable Standards | MORTH Specifications (5th Revision), IRC:SP:84, IRC:119, MORTH Section 800 |
| Containment Level | W3, W4, W5 |
| Impact Severity Level | A / B |
| Beam Material | High Strength Steel |
| Steel Grade | IS 2062 / IS 5986 |
| Galvanisation | Hot Dip Galvanised |
| Zinc Coating | Minimum 550 g/m² |
| Rail Thickness | 2.67 mm / 3.00 mm |
| Beam Length | 4318 mm |
| Beam Width | 506 mm |
| Beam Depth | 85 mm |
| Post Section | ISMC 100 / ISMC 125 / ISMC 150 |
| Post Spacing | 2.00 m (Typical) |
| Spacer Type | C Spacer / U Spacer / Sigma Spacer |
| Fasteners Grade | IS 1367 / IS 5374 Grade 4.6 / 5.6 |
| End Treatment | Flared End / Tangent End / Anchored End |
| Corrosion Protection | Hot Dip Galvanised Finish |
| Application Areas | Bridges, Flyovers, Medians, Expressways, Curves, Embankments and High-Risk Road Sections |
| Testing Standard | Full Scale Crash Tested as per IRC and MORTH requirements |
| Country of Manufacture | India |
Every Metal Beam Barriers dispatch to Araria carries mill test certificates, coating-mass reports and dimensional records matching these values.
Middlemen add markup, not value. Because Metal Beam Barriers controls production and dispatch under one roof, your Araria project gets: factory-gate pricing, production slots matched to your chainage schedule, 3-4 days typical transit via the Patna corridor, and one accountable engineering desk from BOQ to offloading. production-led enquiries get exactly the detail they need — production drawings and QC records — on the first call.
Q1: Who is the best Thrie Beam Crash Barrier Manufacturer in Araria?
Metal Beam Barriers (Auroguard Private Limited) manufactures Thrie Beam Crash Barrier for Araria projects factory-direct — with zero intermediaries, so the factory is directly accountable for what lands on your site.
Q2: What does Thrie Beam Crash Barrier cost in Araria?
Pricing is quotation-based on quantity, containment class, finish and destination. Because supply is factory-direct there is no trader margin — send quantities for a fast written quotation.
Q3: How fast can Thrie Beam Crash Barrier reach Araria?
Typically 3-4 days by road from the Kolkata factory, with bulk tonnage routed via the Patna rail head. Expedited dispatch is possible on confirmation.
Share quantity, containment class and destination and the Metal Beam Barriers desk responds directly with factory pricing, specifications and a dispatch plan.
Common Questions
Auroguard Private Limited (brand: Metal Beam Barriers) roll-forms Thrie Beam Crash Barrier for Araria projects factory-direct — no trading layer, no dealer margin.
Yes. Auroguard Private Limited manufactures Thrie Beam Crash Barrier on its own roll-forming and fabrication lines with hot-dip galvanising to 550 g/m2, and supplies it factory-direct — you buy from the manufacturer, not a trader.
Yes. Thrie Beam Crash Barrier is produced to IRC:119, MoRTH Section 800 and applicable IS specifications, with material test certificates and tender documentation provided on request.
Pricing is quotation-based on quantity, containment class, finish and destination. Factory-direct supply means no distributor markup — share your BOQ for a same-day working quote.
Yes. Every supply of Thrie Beam Crash Barrier to Araria is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
Other Intents in Araria
Stock readiness, freight planning and pan-India dispatch timelines for project supply.
Factory-direct pricing and local delivery support — buy from the manufacturer at dealer-level convenience.
Full local supply page — specifications, logistics and dispatch detail.
Also in Araria
Highway crash barrier systems designed and manufactured as per MORTH and IRC specifications for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with hot-dip galvanised finish for maximum durability and road safety.
View details
Highway guardrail systems manufactured as per MORTH and IRC standards for highways, expressways, bridges and medians. Available in W Beam and Thrie Beam configurations with heavy-duty hot-dip galvanised coating for long-term corrosion protection.
View details
High-performance Metal Beam Crash Barriers manufactured to MoRTH Section 810 standards. Hot-dip galvanized for maximum durability and impact absorption on highways.
View details
MORTH-compliant W beam crash barrier systems manufactured for highways, bridges, medians and expressways. Fabricated from high-strength steel with hot-dip galvanised coating for reliable vehicle containment and long service life.
View detailsQuantity, containment class and destination — the desk responds directly with factory pricing.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.